GWL/POWER Charger 3.6V/20A For LiFePO4 Cells (1 Cell)
Manufacturer: GWL/Power
Art.#:
POW4V20A3
Individual pricing for large scale projects and wholesale demands is available.
Contact us:
phone: +420 277 007 550
email: [email protected]
Contact us:
phone: +420 277 007 550
email: [email protected]
Shipping weight: 0.99 kg
LiFePO4 battery charger for single cells - 3.65V / 20A.
Industrial battery charger for lithium cells, specifically programmed to charge LiFePO4 cells
Check our GWL Technology Blog to know more about the proper charging characteristics of LIFePO4 battery.
This charger is designed for charging of single cell (1S) type of LiFePO4 / LiFeYPO4.
Input 100V-240V AC to charge anywhere.
Designed for charging any 3.2V LiFePO4 batteries.
Protection functions: Overvoltage protection, short circuit protection, reverse polarity protection output.
The charger automatically stops charging when fully charged cell.
Isolation voltage = 3.65 +/- 0.05V
LED indication: Red LED = charging, green LED = charging is completed
Input: AC 100-240V 50-60Hz
Output: 3.65 +/- 0.05VDC
Charging current: 20.0 Max
Note
The imperfect connection of the clamps to the battery terminals, causes the transient resistance and current loss which result in max. current charging of 10A. It is recommended to change the original clamps for eyelets which perfectly match to used battery terminals (screws).
Check our GWL Technology Blog to know more about the proper charging characteristics of LIFePO4 battery.
This charger is designed for charging of single cell (1S) type of LiFePO4 / LiFeYPO4.
Input 100V-240V AC to charge anywhere.
Designed for charging any 3.2V LiFePO4 batteries.
Protection functions: Overvoltage protection, short circuit protection, reverse polarity protection output.
The charger automatically stops charging when fully charged cell.
Isolation voltage = 3.65 +/- 0.05V
LED indication: Red LED = charging, green LED = charging is completed
Input: AC 100-240V 50-60Hz
Output: 3.65 +/- 0.05VDC
Charging current: 20.0 Max
Note
The imperfect connection of the clamps to the battery terminals, causes the transient resistance and current loss which result in max. current charging of 10A. It is recommended to change the original clamps for eyelets which perfectly match to used battery terminals (screws).
| Weight (kg) | 0,7 |
| Height (mm) | 45 |
| Width (mm) | 75 |
| Depth (mm) | 150 |
| Nominal Voltage (V) | 3 |
| Max. voltage (V) | 3,65 |
| Charging current (A) | 20 |
GWL/POWER Charger 3.6V/20A For LiFePO4 Cells (1 Cell)
LiFePO4 battery charger for single cells - 3.65V / 20A.
64.90$
Product 22 / 23
