ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah - 1C

Manufacturer: ELERIX
Art.#: EX-L100
68.26$Price without VAT:
Stock status : More than 50 pcs.


Individual pricing for large scale projects and wholesale demands is available.
Contact us:
phone: +420 277 007 550
email: [email protected]



Shipping weight: 2.25 kg Hazardous
Lithium cell with high energy density, made on the safe LiFePO4 technology. Capacity: 100Ah
Brand: ELERIX
Model: EX-L100
Type: LFP
Capacity: 100 Ah
Size: 216x130x36 mm
Weight: 2.05 kg
Nominal voltage: 3.2 V
Operational voltage: 2.5 V - 3.65 V
The maximum charging voltage for initial charge: 3.65 V
Maximum discharge current: 1 C (max. 3 min)
Peak discharge current: 200 A (max. 30 sec)
Operating temperature (discharging): -20 °C up to 55 °C
Operating temperature (charging): -10 °C up to 45 °C
VDA: N/A
Energy density: 155 Wh/kg
Tightening force of terminals up to 4 N/m

ELERIX cells advantages

  • High quality of production for long lifespan
  • Small and light
  • Suitable for electric vehicles, lightweight application and energy storage
  • No toxic chemicals.
  • Aluminium housing (case)
  • High Power up to 1C, 100A discharge
  • Lithium Iron Phosphate - LiFePO4
  • 3000 cycles / 15 years calender life
  • Provides high currents at peak discharge (2 C = 200 A)
  • Plus Temperature Range, No-Frost

LiFePO4 is a very safe technology, with no spontaneous combustion, fire and explosion.The self discharge rate is very low. There is no memory effect – the cells can be recharged at any state of discharge.

Hint Icon We suggest to use the cells in parallel to achieve higher capacity, i.e. 200 Ah (2 cells), 300 Ah (3 cells), 400 Ah (4 cells)

ELERIX vs Winston

Elerix vs Winston, which one to prefer

Who is ELERIX

GWL always strives to offer the best products. But before any of them make it to our pricelists, we rigorously perform a set of various tests and a deep analysis in order to be fully confident about the final selection. During our long existence we came across a number of different brands and manufacturers and we executed hundreds of tests. One of the successful outcomes of these researches is a new brand ELERIX. What all products with the ELERIX logo (and vivid yellow colour) have in common is their high performance and quality for a price they are more than worth for. GWL would like to present you this fine brand and all its products on the shelves of the warehouse and e-shop. As always, we are adding tech. support, warranty and after sales services on top.

Elerix batteries

How to connect the cells

Take a look at using the long and short connectors for EX-L100.

How to connect the cells

Discharge test

The following chart shows the discharging capacity test. Even the Discharging current 0.5 C, 1 C, in voltage range 3.58 V - 2.5 V.

Discharge chart

Where the battery fits the best?

  • Suitable for all traction application:
    eletric vehicles, electric bikes or scooters

  • Also can be used for the stationary applications:
    energy storage or solar applications

Operational instructions

  • All goods are supplied as new, directly from the manufacturer
  • Before the first use, always charge the cells to full voltage
  • The initial charge must be done with low current at max 0.5C - i.e. 55 A for 110 Ah cell
  • Protect the cell terminals against dirt, damage and short-circuit
  • The cells must be monitored and protected against deep discharge and over charge
  • The charge and discharge must be carried under supervision
  • NOTE: This cell has a special type of M10 terminals with "FINE THREAD" which pitch thread is 1,25. 2 pcs are supported for free of charge in the packing, if needed more, check related products.
User Manual iconImportant: Always follow the guidelines in the USER MANUAL
Technical support iconDo you have technical question? Try our TECHNICAL SUPPORT SECTION.
Blog lemon iconLooking for more information and some valuable read? Try our BLOG.

Initial, first time charging

Cells are precharged from manufacturer to conservation charge (usually 30-50%). The cells have to be charged with low current before the first use. The first charge should not exceed 0.5 C - eg for 100 Ah cell is 50 A.

For initial charging of multiple cells, connect them in parallel and the charger outputs should be connected to both ends of the parallel rows of cells.

More information about charging ? F.A.Q section

We recommend to use chargers specially made for LiFePO4 cells. First charge and initial balancing of the whole pack is important step towards long lifetime.

Alternatively you can use regulated (Laboratory) Power supply as initial charge tool.

.
Short description of how to proceed at our BLOGBlog lemon icon
Elerix cell advantages SHOP FOR SUITABLE CHARGERS

F.A.Q

Weight (kg) 2.05
Height (mm) 216
Width (mm) 130
Depth (mm) 36
Nominal Voltage (V) 3.2
Capacity (Ah) 100
Max discharge current (A) 100
Optimal discharge current (A) 50
Max charging current (A) 100
Optimal charging current (A) 33.3
icon ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah - 1C Lithium cell with high energy density, made on the safe LiFePO4 technology.... 68.26$
24 visitors online.
All Rights reserved © 2022 GWL a.s. - GShop v. 1.4.8