ELERIX Solar panel Mono Half Cut 410Wp 120 cells, (ESM-410) White

Technical information

Complete datasheet
Maximum Power (Pmax) is 410Wp
Cell technology is PERC Half Cut mono crystalline
Module efficiency is 21,40%
Open Circuit Voltage (Voc) is 41,6V
Number of Solar cells is 120
Color of the frame is White
Weight is 21kg
Dimmensions are 1760 * 1096 * 35mm
Connection cable with MC4 connector
SVT code SVT30231


Monocrystalline Half Cut photovoltaic panel EXS-410MHC-W with peak power of 410Wp excels with unified silver design (frame, covered busbars, cells). The panel offers excellent power output throughout the complete sun spectrum, its durable frame, and structure is capable of holding heavy snow load up to 5400 Pa and Wind load up to 2400 Pa. The panel is resistant to salt mist, ammonia, and blowing sand and therefore suitable for seaside, farm, or desert areas. The junction box is enclosed in the IP68 protective casing increasing its long term weather resistance.

Do you have technical question? Try our blog.

Volt-ampere characteristic measurement result

This panel was tested in the accredited testing laboratory CVVOZE of the PVLab Brno department, which tested the electrical properties and defect detection of photovoltaic panels.

Power output characteristics - temperature and irradiance

Solar panels are fed by direct Sunlight, however, they perform better in colder ambient temperatures. All Datasheet values are measured under standardized 20°C. The graf shows the behavior of the panel in warmer areas. Panel losses part of its output efficiency, but is well suited even for extremely hot areas.

Like with temperature, the Datasheet values are stated at standardtized value of irradiance at 800 W/m2, to roughly calculate actual power output in your area, find the avarage irradiance and compare with the graf.

30 years Warranty

Certifications and quality tests

Solar modules offered by GWL are in compliance and have undergone testing for a full range of related certifications.
Including: CE, TÜV SÜD, UL certification (USA), JET (Japan), MCS (United Kingdom).
Furthermore, the Panels are produced in accordance to global guidelines and meet ISO and OHSAS standards.

Efficiency, Reliability, Safety and Ecology

High Efficiency

Solder-coatingless cells
Fine Grid Electrodes
BSF (Black surface field) structure
Anti-Reflective coating
Black film reflected light
High-Transmittance Glass
High Power Output in Actual use

High Safety

Triple-layer structure junction box
Highly reliable bypass diode
Lock Mechanism Equipped connectors
Conformity with IEC 61215, IEC 61730 Standards

High Reliability

Original derating designing concept
Straight tabs
Double-Sided indeptended tabs
Reliable Bus bar
Corrosion resistance of the frame
High tensile strenght structure
Tempered glass
Triple-layer structure back film

Eco-friendly

Lead-free solder PV module
Manufactured in the plant certified ISO14001
Recyclable steel pallets