Maximum Power (Pmax) is 550Wp
Cell technology is PERC Half Cut mono crystalline, Bi-Facial
Module efficiency is 21,30%
Open Circuit Voltage (Voc) is 49,85V
Number of Solar cells is 144
Color of the frame is Silver
Weight is 28,5kg
Dimmensions are 2279 * 1134 * 35mm
Connection cable with MC4 connector
SVT code:SVT30236.The panel is registered at the State Environmental Fund of the Czech Republic.
Bifacial modules produce solar power from both sides of the panel. Whereas traditional opaque-backsheeted panels are monofacial, bifacial modules expose both the front and backside of the solar cells. Bifacial solar modules offer many advantages over traditional solar panels. Power can be produced from both sides of a bifacial module, increasing total energy generation. They're often more durable because both sides are UV resistant, and potential-induced degradation (PID) concerns are reduced. Balance of system (BOS) costs are also reduced when more power can be generated from bifacial modules in a smaller array footprint. When bifacial modules are installed on a highly reflective surface (like a white TPO roof or on the ground with light-colored stones), up to a 30% increase in production can be gained just from the extra power generated from the rear. Bifacial modules are the future of the industry.
|Do you have technical question? Try our blog.|
Power output characteristics - temperature and irradiance
Solar panels are fed by direct Sunlight, however, they perform better in colder ambient temperatures. All Datasheet values are measured under standardized 20°C. The graf shows the behavior of the panel in warmer areas. Panel losses part of its output efficiency, but is well suited even for extremely hot areas.
Like with temperature, the Datasheet values are stated at standardtized value of irradiance at 800 W/m2, to roughly calculate actual power output in your area, find the avarage irradiance and compare with the graf.
30 years Warranty
The manufacturer provides up to 30-year Warranty for remaining Power output. The warranty is calculated linearly year by year.
The warranty in detail:
The long warranty period is possible by quality inspection and testing during production. The manufacturer hosts testing laboratory used to confirm TUV, Ul, CSA, ETL, SGS and CGC certifications. They also use this laboratory to ensure their product meet the highest standards.
Certifications and quality tests
The GWL/Sunny panels are in compliance and have undergone testing for a full range of related certifications.
Including: CE, TÜV SÜD, UL certification (USA), JET (Japan), MCS (United Kingdom).
Furthermore, the Panels are produced in accordance to global guidelines and meet ISO and OHSAS standards.
Efficiency, Reliability, Safety and Ecology
Fine Grid Electrodes
BSF (Black surface field) structure
Black film reflected light
High Power Output in Actual use
Triple-layer structure junction box
Highly reliable bypass diode
Lock Mechanism Equipped connectors
Conformity with IEC 61215, IEC 61730 Standards
Original derating designing concept
Double-Sided indeptended tabs
Reliable Bus bar
Corrosion resistance of the frame
High tensile strenght structure
Triple-layer structure back film
Lead-free solder PV module
Manufactured in the plant certified ISO14001
Recyclable steel pallets
|Weight (kg)||883.5 + packing|
|Peak power (Wp)||550|
|MPP voltage (V)||42.00|
|MPP current (A)||13.10|
|Voltage without load (V)||49.85|
|Short-circuit current (A)||13.97|
|Efficiency of solar panel (%)||21.30|
|Max. compressive load (Pa)||5400|
|Number of cells||144|