LiFePO4 High Power Cell (3.2V/60Ah) - Alu case, CE

Main advantages of the ZG-LFP060AH

• Supports high speed charge and discharge
• Provides high currents at peak discharge
• High quality of production
• Narrow tolerance of the specifications
• Metallic housing (case)
• Special terminal screw-thread for perfect connection. Two nuts with this screw-thread included

Hint: It is possible to use the cells in parallel to achieve higher capacity, i.e. 120Ah (2 cells), 180Ah (3 cells), 240Ah (4 cells)

Technical information

• Nominal voltage 3.2 V, operational voltage is 2.8 V - 3.65 V
• The maximum charging voltage for initial charge 3.8 V
• Recommended subsequent charging is to 3.65 V
• The minimum voltage is 2.5 V
• Maximum discharge current is 3C continuously
• Peak discharge current is 10C (for 15 seconds)
• Operating temperature -20°C up to 50°C (discharging)

Operational instructions:

• All goods is supplied as new, directly from the manufacturer
• Before the first use, always charge the cells to full voltage
• The initial charge must be done with low current at max 0.5C - i.e. 30A for 60Ah cell
• Protect the cell terminals against dirt, damage and short-circuit
• The cells must be monitored and protected against deep discharge and over charge
• The charge and discharge must be carried under supervision

Support information

• Technical articles for the ZG cells
• Cell Balancing Modules and the Simple Battery Management
• Suggestion for BMS: the BMS123 complete system
• How to select the proper charger for LiFePO4 cells?
• Overview of support information for the LiFePO4 cell charging
• The intial charging of the cells in parallel
• BMS versus Circuit Breaker – understanding the protection of the LFP cells
• The GWL/Blog section about chargers