ELERIX Energy Storage 5.2kWh, EX-S5

Product description

The energy storage is based on LiFePO4 batteries with integrated Battery Management System (BMS) and short-circuit protection. Power output is 48V 100A (5 kW), communication output is CAN and RS485. The outputs are on both sides of the box. The individual 5 kW modules can be scaled with system power and communication connections up to 12 units (master + 11 slaves). This increases the storage capacity up to 60 kWh, but the resulting output power and voltage remain the same - 5 kW /48V at the master output. Parallel interconnection of masters is not supported by the software.

Feature description

The battery is capable of powering a load and/or being charged via either power output (the outputs are connected in parallel internally). Using an integrated BMS, these outputs are regulated by a power semiconductor element. The state of charge is indicated on the LED indicator. The outputs are protected against short circuit by a 200A solid-state fuse (integrated).

Via the CAN communication port, the battery can be connected to the Cerbo communication module and the following values can be read out in the VRM portal:

Power drawn or supplied (resulting difference between charging and discharging power)

Current drawn or supplied (resulting difference in flow)

Total battery voltage

SoC (State of Charge)

Battery internal temperature

---

Description of inputs, outputs

---

Description of controls

---

Description of indicators

---

Application examples

---

---

Three-phase hybrid PV plant with communication

---

What do you need to purchase to make your own Single-phase off grid PV plant?

6 pcs Solar panels RIS-390MHC-B ( 2 x serial string 3 pcs)

1 pc Solar Charge Controller BlueSolar VE-MPPT-150/45

1 pc Inverter Phoenix Inverter VE-INV-48/2000-SMART

1 pc ELERIX Energy Storage EX-S5

---

What do you need to purchase to make your own Single-phase hybrid PV plant?

10 pcs Solar panels RIS-390MHC-B ( 2 x serial string 5 pcs)

1 pc Junction box

1 pc Inverter and Charger EasySolar-II 48/3000/35-32 MPPT 250/70 GX (VE-EASY-48/3k-35-32)

1 pcs ELERIX Energy Storage EX-S5

---

What do you neeed to buy to make your own Three-phase hybrid PV plant with communication?

20 pcs Solar panels RIS-390MHC-B ( 4 x serial string 5 pcs)

1 pc Junction box

3 pcs Inverter and Charger MultiPlus-II VE-MULTI-48/3k-35-32

2 pcs Charge Controller SmartSolar VE-MPPT-250/70S-CAN

1 pc Communication Centre Cerbo GX

2 pcs ELERIX Energy Storage EX-S5

---

Package contents

1 pc ELERIX Energy Storage

1 Set for anchoring to the wall (brackets, dowels, screws)

1 pc Power cable for connecting to the downstream installation (one end system connector for connection to the box, other end 8mm lugs, length 2 m

1 pc Connecting power cable between boxes (system connectors on both sides, length 0.5 m)

1 pc Grounding wire (length 0.5 m, M5 lugs)

1 pc Link communication cable between boxes (LinkPort, length 0.5 m)

For communication with the Victron system it is necessary to purchase optional accessory CAN Patch Cable EX-S5-CAN-V

---

The communication patch cable included in the package is determinated to connection with other brand of inverters as stated below:

Brand: Voltronic
Models:

Axpert VM III 5K-48

Axpert Max 7200-48-230

Axpert MKS III 5K-48

Axpert King Rack 5K-48V

Brand: Solis
Models:

RHI-(3-6)K-48ES-5G

RHI-(3-5)K-48ES

---

The complet user manual and set up instructions can be found in Documets for download..