The PDF files withthe 3D drawings of the ELERIX cellsare now available at the ELERIX GitHub Repository.
One of the main differences between the ELERIX Brand products and the other no-name cells is that theELERIX cells come with a full set of technic
What if the spiders were to make the battery designs? Well, here you can see how the spiders could see the lines of the 3D drawing of the ELERIX EX-L50K cell.
Here is the real.
Enjoy!
Check the details about the EX-LP12V100R service connector in the EX-L100R technical manual.
New models of the ELERIX Terminal Connectors - coming to you soon.
.
This is an example of amodel charging curve for a 24V LFP battery. In this scenario the battery is finely charged with a 2 Amp balancing charger. There are following stages of the charging process:
1 – The battery is chargedto the full voltage (29.6V = 3.7V per cell)
2 – The ba
For ELERIX 50Ah cell which terminal belt is the best to be used?
With the cell width of 36 mm, there is an option to use the38mm longand the42 mm long copper belts. Both of these terminal belts work fine.
During 2021, there was a minor upgrade for the design of the terminal connectors for the TSWB cells:
There isvisual change of the shapeof the terminals. Theterminals are now fully circularand do have the size of a hexagonal nut.
The main difference is the former red plastic circle a
Connection to the balancing cable by means of the magnetic connector.
JST XH - 5 connector extension board- allows you to connect more devices to monitor, balance and charge the 12V front terminal battery.
Waring:never connect individual batteries in parallel by means of the
Safety recommendation: if not used, please cover the service connector by a self-sticking tape or any other adhesive cover.
This way you can prevent accidental touching of the pins by some metal objects put on the upper side of the battery.
Warning: the individual output pins are directly c
The EX-L12V100R Service Connector is a magnetic 5-pin connector that allows direct access to the individual cells of the 12V battery.
The function of the connector is following