Photovoltaic hot water heating system with Grid Tied AC Inverter and Limiter 2kW

Manufacturer: GWL/Power
Art.#: GF-SUN-2000-TUV-SET
1,109.51€Price without VAT:
Stock status : Out of stock!
Available in 5 days


Individual pricing for large scale projects and wholesale demands is available.
Contact us:
phone: +420 277 007 550
email: [email protected]



Shipping weight: 211.25 kg
Photovoltaic hot water heating system with Grid tied AC inverter and power limiter 2kW SUN-2000G (45-90V).

 

Product description

The SUN 2000 VA grid tied inverters with limiter (GTIL) is only connected to the boiler circuit and works only when the boiler is heating water (if its heating is switched on). Thus, the entire boiler is always consumed power, so that there can be no overflow to the mains (nor the indicating overflows). In the event of a failure of the system components (the boiler, inverter contactor), the system is in the no-current mode insured by the inverter overflow limiter.
The set is recommended for use in chalets and cottages, where there is low level of electricity supply, overloaded power grid or limited possibilities to use other sources for water heating. Excellent ratio value for money with simple another source of electricity installation gives you an excellent opportunity in freedom for decision making.

Benefits for FREE from GWL !!!

WITH ORDERING A KIT FROM US YOU WILL RECEIVE ADDITIONAL TECHNICAL SUPPORT

  • Implementation documentation (sample single-pole and wire diagram)
  • List of all necessary components
  • Half an hour of telephone or e-mail technical support from our
         technicians for free of charge
  • Pre-sales sales and technical support including list of components

  • Component description


    GF-SUN-2000G2

    The GF-SUN-2000G2 grid tied inverters with limiter (GTIL) work on their AC output only with the support of el. 230V grid. PV panels or a battery in the appropriate voltage range can be connected to the DC input of the inverter. An internal limiter for power overflows to the grid is included. All necessary data and parameters can be monitored and set on the built-in display.

    EXS-410MHC-W

    Monocrystalline Half Cut photovoltaic panel EXS-410MHC-W with peak power of 410Wp excels with unified silver design (frame, covered busbars, cells). The panel offers excellent power output throughout the complete sun spectrum, its durable frame, and structure is capable of holding heavy snow load up to 5400 Pa and wind load up to 2400 Pa. The panel is resistant to salt mist, ammonia, and blowing sand and therefore suitable for seaside, farm, or desert areas. The junction box is enclosed in the IP68 protective casing increasing its long term weather resistance.





    PowerAssist

     

    How it works?


    The maximum share of energy from the sun for water heating is is achieved by setting the heating time with the switching clock to circuit from the mains. The time interval of maximum of energy gain from the PV panels and the following the final water temperature setting can be optimised by the boiler thermostat. After the correct setting, the system provides sufficient hot water at all times of the year with the maximum possible supply from the PV panels.

    In order to ensure a flow-free mode, the offered set, a boiler with a heating input of 2 kW or more must be connected. In the case of a smaller output, an inverter can be used with a capacity of 1 kVA, in the case of a larger heating capacity than 2 kW, the inverters can be combined so that their the nominal output is always less than or extremely equal to the heating element.


    The power output from the substation is connected to the boiler inlet in parallel with the mains supply. The boiler also needs to be connected to the phase switched off by the thermostat (to the boiler body) the control output of the contactor coil that switches the inverter to the boiler.


    Application - Set for supporting DHW heating in boilers





    Application - Electrical wiring diagram






    Package contents

  • 1 pc GridTied AC Inverter With Limiter 2kW GF-SUN-2000G2
  • 6 pcs ELERIX Solar panel Mono Half Cut 410Wp EXS-410MHC-W
  • 3 pcs konector (set) MC4 MC4-P
  • 30 m Dual Core Solar Cable 1500V/32A SC6-1M-2C
  • 3 pcs Complete Holder For 2 Panels On Roof With Hooks SCOMP-2H2


  • What do you neeed to buy additionaly to make your own Photovoltaic hot water heating system? (NOT DELIVERED IN THE PACKAGE)

  • 1 pc DC plastic Junction box 12 modules
  • 2 m Cable CYSY 3x 1.5mm)
  • 1 pc lugs, sleeves, clamps
  • 6 pcs fuse box 16A
  • 1 pc two-pole fuse disconnector OPV10
  • 1 pc single pole circuit breaker 10A
  • 1 pc single pole circuit breaker 6A
  • 1 pc single pole contactor 16A, coil AC 230V



  • FAQ We recommend that you leave the installation of the entire system to a professional electrician. Unprofessional installation can cause permanent damage of individual components in the system !!!


     

    FAQ The complet datasheet with technical specification can be found in Documets for download.

    Weight (kg) 132
    icon Photovoltaic hot water heating system with Grid Tied AC Inverter and Limiter 2kW Photovoltaic hot water heating system with Grid tied AC inverter and power... 1,109.51€
    40 visitors online.
    All Rights reserved © 2024 GWL Group a.s. - GShop v. 1.4.8