Industrial 3.2V 160Ah lithium cell with high energy density, based on safe LiFePO4 (LFP) technology. Suitable for electric vehicles (EV), energy storage, solar, and lightweight applications.
Brand: | ELERIX |
---|---|
Model: | EX-L160 |
Type: | LiFePO4, lifepo4 |
Capacity: | 160 Ah |
Size: | 252x165x39 mm |
Weight: | 3.58 kg |
Nominal voltage: | 3.2 V |
Operational voltage: | 2.5 V - 3.65 V |
The maximum charging voltage for initial charge: | 3.65 V |
Maximum discharge current: | 1 C |
Peak discharge current: | 240 A (max. 30 sec) |
Operating temperature (discharging): | -20 °C up to 60 °C |
Operating temperature (charging): | 0 °C up to 50 °C |
VDA: | N/A |
Energy density: | 143 Wh/kg |
Tightening force of terminals | up to 4 N/m |
All the ELERIX cells undergo rigorous battery testing in Tier 1 factories prior to distribution, including during production and before shipping. The ELERIX brand is distinguished by the high quality of its LFP cells, primarily Class A.
LiFePO4 (LFP, LiFePO4, lifepo, lifepo4) is a very safe technology, with no spontaneous combustion, fire and explosion.The self discharge rate is very low. These rechargeable cells have no memory effect – the cells can be recharged at any state of discharge. Check the cell datasheet on this website.
![]() |
We suggest to use the cells in parallel to achieve higher capacity, i.e. 320 Ah (2 cells), 480 Ah (3 cells), 640 Ah (4 cells) |
Take a look at using the long and short connectors for ELERIX 160Ah LiFePO4 cell EX-L160.
![]() | Important: Always follow the guidelines in the USER MANUAL |
![]() | Do you have technical question? Try our TECHNICAL SUPPORT SECTION. |
![]() | Looking for more information and some valuable read? Try our BLOG. |
Cells are precharged from manufacturer to conservation charge (usually 30-50%).
The cells have to be charged with low current before the first use.
The first charge should not exceed 0.5 C - eg for 160 Ah cell is 80 A.
For initial charging of multiple cells, connect them in parallel into a battery pack and the charger outputs should be connected to both ends of the parallel rows of cells.
More information about charging ? F.A.Q section
We recommend using chargers specially made for LiFePO4 cells. First charge and initial balancing of the whole battery pack is important step towards long lifetime.
Alternatively you can use regulated (Laboratory) Power supply as initial charge tool.
Short description of how to proceed at our BLOG | .![]() |
Weight (kg) | 3.58 |
Height (mm) | 252 |
Width (mm) | 165 |
Depth (mm) | 39 |
Nominal Voltage (V) | 3.2 |
Capacity (Ah) | 160 |
Max discharge current (A) | 160 |
Optimal discharge current (A) | 80 |
Max charging current (A) | 160 |
Optimal charging current (A) | 53 |