The wireless communication module is based on LoRa technology and it is possible to be purchased and installed in all OlifeEnergy chargers and Smartmeters produced after 1st January 2022. The module is determined for installation into the charger, second one is for installation into the Smartmeter. One of them is set as a RX and the second one as a TX module. The wireless module uses the LoRa communication protocol with frequency 868 Mhz. The working range differs from the environment. Considering the similar frequency range, the ability of the signal to pass through objects is similar as it is with cell-phone signal. In open areas the working range of the module can exceed 100 meters.Conditions for subsidies for the purchase and connection of charging stations in Germany can be found on the website: www.kfw.de
Setting the address and installation of WiFi module in the SmartMeter
If your Olife Smartmeter is equipped by wireless communication module, it is necessary to set the channel on which LoRa transmit and receive the signal. The ID in the SmartMeter is set via DIP switches and installed on the mainboard as drawn on the picture. The range is 0-15. The same ID must be set at the Wallbox as well.
Setting the address and installation of the WiFi module in the Wallbox
If your OlifeEnergy charging station is equipped with the wireless communication module, it is necessary to set the channel on which LoRa transmit and receive the signal. For the OlifeEnergy charger the channel is possible to change with smartphone application. The range is 0-15. After setting the ID in the charging station via the smartphone app, please reset the charger thought the application, or by breaking the power to the charging station. The same ID must be set at the SmartMeter as well..
|Datasheet and Manual about detailed product description, operation, installation and technical specification can be found here.|
|Operational temperature (°C)||-25 až +50|
|Dimension (mm)||90 x 70 x 56|
|Input voltage (V)||AC 230/400|