Versabond is a unique construction sealant with lasting elasticity based on the latest SPUR polymer techniques. The product is very suitable for bonding and sealing nearly all surfaces in the automotive and construction sector such as metal, aluminium, concrete, stone, wood,
construction foil, PVC, EPDM, rubber, pond liner, etc.
Serious eye damage/eye irritation:
Wash hands thoroughly after handling
Wear protective gloves, protective clothing, eye protection, face protection
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
First aid and measures
Get medical advice/attention if you feel unwell.
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Remove affected person to fresh air.
The product is non-irritating to the skin.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Call a POISON CENTER/doctor if you feel unwell.
Handling and Storage
Precautions for safe handling:
Do not eat, drink or smoke when using this product. Use personal protective equipment as required..
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Protect from sunlight. Store in a well-ventilated place. Store in a dry place. Keep away from ignition sources.
Store in a well-ventilated place. Impermeable underground / retention basin.
Exposure controls/personal protection
Appropriate engineering controls:
Ensure good ventilation of the work station.
Personal protective equipment:
Gloves. Safety glasses.
Where hand contact with the product may occur, the use of gloves (approved according to the EN374 standard) made from the following materials
may provide suitable chemical protection: Nitrile rubber. For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for > 480 minutes. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering
this level of protection may not be available. In this case a lower breakthrough time may be acceptable as long as appropriate glove maintenance and replacement regimes are rigorously followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the
exact composition of the glove material. Depending on model and material, glove thickness generally should be greater than 0,35 mm. Suitability and durability of a glove is dependent on usage (= frequency and duration of contact), chemical resistance of glove material, dexterity. Always seek
advice from glove suppliers. Contaminated gloves should be replaced. Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands should be washed and dried thoroughly.
Wear security glasses which protect from splashes.
Wear suitable protective clothing.
Not required where ventilation is sufficient.
Table of adhesives for use on different roof surfaces
The adhesive table
below indicates the type of adhesive that can be used for bonding
the Composite Support (CS) to various roof surfaces
and for bonding the module to the Composite Support (CS).
Yield of adhesives per 1 panel
600 ml/unit (400 ml per module)
310 ml/unit (N/A)
40 m/unit (7 m per module)