Seal-it® 525 CLEAN & BOND is a fast-drying cleaner and primer in one product, specially developed as an adhesion promoter for sealants and adhesives on non-porous surfaces.
As a primer for various metal surfaces, such as aluminium, steel, stainless steel, zinc, copper, lead, chrome and brass.
As a primer for various surfaces with a lacquer and/or paint system. Check that the surface will not be damaged before use.
As a primer for polyester surfaces, such as GRP, ABS and PVC.
Improves the adhesive properties of sealants and adhesives on non-porous surfaces.
Fast-drying. Maximum drying time of approx. 5 - 10 minutes.
User-friendly and easy to apply.
Cleaner and Primer in one, requiring just a single application.
Time-saving and economical.
Efficient to use.
In unopened original packaging, stored upright in a cool dry place, between +5°C and +30°C
, the product will last up to 12 months after the production date.
Application temperature (ambient and surface) between +5°C and +40°C.
The surface must be dry, clean and free of grease and dust.
Open the can before use using the rotary knob and plastic seal on the top of the can.
Do not use Seal-it® 525 CLEAN & BOND immediately out of the original packaging.
Pour out an amount of Seal-it® 525 CLEAN & BOND into another glass/can
Apply Seal-it® 525 CLEAN & BOND with a clean, dry, lint-free and non-running cloth in a thin layer or multiple layers in order to clean the surface.
Wait until dry before applying the sealant and/or adhesive. (approx. 5 - 10 min.).
After Seal-it® 525 CLEAN & BOND has been applied to the surface, we recommend applying the sealant or adhesive within six hours for the best result.
Avoid touching treated surfaces as this can impair the adhesion.
Health & safety
Avoid long-term contact with skin.
If uncured material gets in your eyes, rinse out with plenty of water and consult a physician. Store Seal-it® 525 CLEAN & BOND in a closed container in a safe place outside of the reach of children. Highly evaporative and flammable.
Use under good ventilation conditions. Do not smoke or use the product in the vicinity of an open flame. Wear safety goggles, gloves and suitable work attire.
The product safety data sheet is available on request.
Yield of primer
Seal-it-525 CLEAN and BOND:
500 ml/100 m2