ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah

Manufacturer: ELERIX
Art.#: EX-L100EU
104.74$Price without VAT:
Stock status : Out of stock!
Available in 14 days

Individual pricing for large scale projects and wholesale demands is available.
Contact us:
phone: +420 277 007 550
email: [email protected]

Shipping weight: 4.49 kg Hazardous
ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah
Model: EX-L100EU
Type: LFP
Capacity: 100 Ah
Size: 234×120×60 mm
Weight: 3,45 kg
Nominal voltage: 3.2 V
Operational voltage: 2.5 V - 3.65 V
The maximum charging voltage for initial charge: 3.65 V
Maximum discharge current: 3 C
Peak discharge current: 500 A (max. 30 sec)
Operating temperature (discharging): from -20 °C to +60 °C
Operating temperature (charging): 0 °C to 50 °C
VDA: 234/120
Energy density: 93 Wh/kg
Tightening force of terminals up to 6 N/m

A Grade ELERIX cells

All the ELERIX cells are rigorously tested in Tier 1 factories before distribution, even during production and before shipping. The ELERIX brand is distinguished by the high quality of its cells, which are primarily Grade A.

ELERIX EX-L100EU advantages

  • High quality European production
  • Maximum charging current 2C (200A)
  • No toxic chemicals, unexplosive.
  • Aluminium housing (case)
  • Suitable as a board battery for RV‘s, lightweight applications and Energy Storage Solution
  • High Power up to 3C-300A discharge
  • Lithium Iron Phosphate - LiFePO4
  • 3000+ cycles / 15 years calender life
  • Provides high currents at peak discharge (500 A)
  • Plus Temperature Range, No-Frost

LiFePO4 is a very safe technology, with no spontaneous combustion, fire and explosion.The self discharge rate is very low. There is no memory effect – the cells can be recharged at any state of discharge.

Hint Icon We suggest to use the cells in parallel to achieve higher capacity, i.e. 200 Ah (2 cells), 300 Ah (3 cells), 400 Ah (4 cells)

How to connect the cells

Take a look at using the long and short connectors for EX-L100EU.

How to connect the cells

Discharge test

The following chart shows the discharging capacity test. Even the Discharging current 1C in voltage range 2.15V - 3,35V.

Discharge chart

Operational instructions

  • All goods are supplied as new, directly from the manufacturer
  • Before the first use, always charge the cells to full voltage
  • The initial charge must be done with low current at max 0.5C - i.e. 55 A for 110 Ah cell
  • Protect the cell terminals against dirt, damage and short-circuit
  • The cells must be monitored and protected against deep discharge and over charge
  • The charge and discharge must be carried under supervision
User Manual iconImportant: Always follow the guidelines in the USER MANUAL
Technical support iconDo you have technical question? Try our TECHNICAL SUPPORT SECTION.
Blog lemon iconLooking for more information and some valuable read? Try our BLOG.

Initial, first time charging

Cells are precharged from manufacturer to conservation charge (usually 30-50%). The cells have to be charged with low current before the first use. The first charge should not exceed 0.5 C - eg for 100 Ah cell is 50 A.

For initial charging of multiple cells, connect them in parallel and the charger outputs should be connected to both ends of the parallel rows of cells.

More information about charging ? F.A.Q section

We recommend to use chargers specially made for LiFePO4 cells. First charge and initial balancing of the whole pack is important step towards long lifetime.

Alternatively you can use regulated (Laboratory) Power supply as initial charge tool.

Short description of how to proceed at our BLOGBlog lemon icon


Weight (kg) 3.45
Height (mm) 234
Width (mm) 120
Depth (mm) 60
Nominal Voltage (V) 3.2
Capacity (Ah) 100
Max discharge current (A) 300
Optimal discharge current (A) 100
Max charging current (A) 200
Optimal charging current (A) 30
icon ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah ELERIX Lithium Cell LiFePO4 Prismatic 3.2V 100Ah 104.74$
25 visitors online.
All Rights reserved © 2024 GWL Group a.s. - GShop v. 1.4.8