Blog - LiFePO4

LiFePO4    Winston    Elerix    Micro-Inverters    Solar regulators    Solar panels    GridFree    BMS Systems    Battery Monitoring    Chargers and charging    Inverters DC/AC    EVBIKE    Tests and diagnosis    Installation diagrams    LTO    Electric Cars    Others    Videos    About GWL   
1;2:

1;2:

26.Aug 2015
| Blog - LiFePO4

 

 

GWL DC Contactors - How to connect?

Please follow the picture above for a correct connection of GWL DC Contactors:

1;2: Main switched power contacts (normally open). 

  • Note: these contactors are designed only for DC voltage up to 80V. They are not high voltage DC contactors. The contact of the DC contactor will burn by arcs when using with high DC voltages and high currents. 

A1; A2: The Coil contacts

  • Note: please use only the voltage that the contactor is made for. There are 12V, 24V and 48V coils models in GWL offer. See here the  DC Contactors. Applying higher voltages to the coil will damage the contactor, the coil can “burn”.

Auxiliary contacts: Use AUX contacts only for low-current application, e.g.. status LED pilot lamp.

Contacts are labeled directly at the contactor body, please check your contactor specifications carefully before installation.

Check also the suggestions for the DC contactor connection with a SBM module in these articles: 

30 visitors online.
All Rights reserved © 2024 GWL Group a.s. - GShop v. 1.4.8