Blog - BMS Systems

Sudden battery discharge

FAQ: “Sudden” battery discharge

I have bought a several of LFP cells and made the pack with them to replace the lead-acid battery in my houseboat. The LFP battery was working great and it gives much more capacity than the lead acid. However after several weeks of usage, I came back af

Can you recommend a device to protect a 12V LP battery?

Can you recommend a device to protect a 12V LP battery?

In the past we used to offer a solution called . However due to a small demand, the production of Akumon was discontinued. We also offered some , Battery protector, Battery protect, PowerTector, etc.

GWL/Power team suggests that each customer may find a suitable solution to

BMS S05 - Introductory information

The BMS S05 is the next generation of modular BMS that follows the BMS2405 product line.

Theis designed for up to 24 cells. The BMS S05 is stackable and allows to connect up to 144 cells (6x 24 cells).

TheBMS S05has

The voltage levels for BMS

he BMS provided by GWL are primarily designed for theLFP cells(2.0V to 3.8V). Some BMS models support the LTO and Li-Ion cells as well.

- supports LFP and Li-Ion. Generation 3 supports LTO as well.

- supports LFP, Li-Ion and LTO

BMS S05&n

Checking and checking again

Any system can have a failure or an irregular operation. That is why it is important to perform multiple tests and verifications of each installation.

With battery systemsthe possibility of a failure or malfunction is multiplied by the number of the cellsor the com

AutarcTech - energy storage partner in Germany

TheAutarcTech company is using the cells from GWL to make the energy solution. Learn more about AutarcTech and their products.

AutarcTech GmbH Technologiepark 1 91522 Ansbach Deutschland Tel. 0981 9878 7374

AutarcTech GmbH, founded 2010

GWL/Power Simple Battery Management Board 4 cells (12V/16A)

Theis designed for a simple protection of the 12V battery packs using the 3.2V LFP cells.

The SBM has higher rating resistors (bigger ones) so that the balancing current is little bigger. For even higher balancing currents we suggest adding the&nb

SBM for 24 cells (72V)

The SBM boardis specially designed for high-power EV-Bikes and e-Scooter projects with voltage 72V (24 LiFePO4 cells).

BMS123 Smart with Victron inverters

Check the connection of thewith thetThe Victron inverters: These are equipped withAUX I/O(allow to charge) andTemp sense(allow to discharger ports. The charge/discharge contact functionality is available only in case the.

GWL/Power BMS123 Smart - Extended Module

Extended module for advanced applications like automotive, boat and other applications using the BMS123 Smart.

The module adds the following functionality to the BMS123 Smart system:

• 4 configurable relays- switch relay on at time or conditions
• 2 individual 
18.Dec 2017
| Blog - BMS Systems